Full graphics version | Change low graphics options | Skip navigation | Site map | Help | Contact us

Home page | Publications | Events | Meeting diary | Online payments

• Home page
  • Advice & Benefits
  • Business
  • Community & Living
  • Council & Democracy
  • Councillors & Meetings
  • Education & Learning
  • Planning & Building
    • Planning Applications
    • Building Regulations
      • Building Control
        • Do I need Building Regulations Approval?
        • How do I make a Building Regulations Application?
        • Loft Conversions
        • Sound Insulation
        • When will my Project be Inspected?
        • Dangerous Structures
        • Demolitions
        • Open and Derelict Buildings
    • Conservation and Landscape
    • Land Charges/Searches
    • Planning Policy
    • Planning & Building General Information
  • Health & Social Care
  • Housing
  • Jobs & Careers
  • Leisure & Culture
  • News & Media
  • Transport & Streets

Do I need Building Regulations Approval?

The majority of Building Projects require approval under the Building Regulations, these include:-

1. The construction of a new House, Office, Shop, Factory, Hotel or other significant Building.
2. The extension of any building, unless the extension is either a porch or conservatory (see below).
3. Structural Alterations carried out on buildings, eg. removing load-bearing walls.
4. Alterations to drainage systems, heating systems and hot water systems.
5. Internal alterations to commercial buildings that affect means of escape in case of fire.
6. Cavity Wall Insulation.
7. Underpinning.
8. Replacement Windows.
9. Certain changes of use of Buildings.

Self Certification

To help you to gain Building Regulations approval more easily the government have allowed certain trade bodies to self certify their members work and to issue Building Regulations Certificates. Currently the bodies which can issue these certificates are:-

1. FENSA - Contractors registered with FENSA can issue certificates for replacement windows.
2. CORGI - CORGI registered contractors can issue certificates for installations and alterations to gas, hot water and heating systems so long as the contractor is a registered installer and not just a service engineer.
3. OFTEC - Registered OFTEC installers can issue certificates for installation of and alteration to oil burning boilers and appliances.
4. HETAS - Registered HETAS installers can issue certificates for installation of and alteration to solid fuel burning boilers and appliances.

Tips for using Self Certified Contractors

1. Always ensure the contractor is registered for the work they are undertaking, eg. If you are having a new heating system installed ensure the contractor is a registered installer not a service engineer.
2. Always ensure that at the end of the job the contractor issues you with a Certificate confirming that the work complies with the Building Regulations, you may need this when you come to sell your property.
3. If you are in any doubt about anything either contact the relevant trade association or contact Stratford Building Control for advice.

Projects that do not Need Building Regulations

Some projects are exempt from the Building Regulations, these include:

1. Most Agricultural Buildings.
2. Temporary Buildings intended to remain in place for no longer than 28 days.
3. Small Detached Buildings which contain no sleeping accommodation and have a floor area not exceeding 15m2 eg. garden sheds.
4. Small Detached Buildings with a floor area not exceeding 30m2 which contain no sleeping accommodation and are either substantially non-combustible or are located at least 1m from the property boundary eg. Detached single or small double garages of masonry construction.
5. Porches with a floor area not exceeding 30m2 so long as a door is retained in the current front door position.
6. Conservatories with a floor area not exceeding 30m2 providing that the conservatory is separated from the house, is single storey, substantially glazed and has a translucent roof.
7. Carports open on at least two sides.
8. Covered ways.

If you are in any doubt as to whether your particular project requires Building Regulation approval please contact us and we will be pleased to advise you.

Please click on the links on the right to view the Building Control Service Standards.

For further information please contact the Building Control Team on 01789 260626, or by emailing buildingcontrol@stratford-dc.gov.uk

Downloads:
Building Control Service Standards (37KB PDF) | Help with PDFs

External links:
FENSA | Corgi Gas | OFTEC | HETAS

See also:
How do I make a Building Regulations Application? | Online Building Regulations Submission Planning & Building frequently asked questions

Main navigation:
Advice & Benefits | Business | Community & Living | Council & Democracy | Councillors & Meetings | Education & Learning | Planning & Building | Health & Social Care | Housing | Jobs & Careers | Leisure & Culture | News & Media | Transport & Streets